How to Mount a Monitor on an Arm
To mount a monitor on an arm, check the VESA pattern and weight first, secure the arm to the desk, then attach the plate and test the tilt. Work with a second person for larger screens and check the mounting hardware before use.
On this page (8 sections)
- What do you need before you mount a monitor on an arm?
- How do you secure the arm to the desk?
- How do you attach the VESA plate to the monitor?
- What if your monitor has no VESA holes?
- How do you lift and attach the screen to the arm?
- How do you set screen height, tilt, and distance?
- Can you mount a monitor on an arm on glass or thin desks?
- How do you check the mount is safe before daily use?
To mount a monitor on an arm, check the VESA pattern and weight first, secure the arm to the desk, then attach the plate and test the tilt. You need the screen pattern, the arm clamp, the right screws, and a clear desk edge before you start.
This guide covers how to mount monitor on arm in a safe order. It also covers adapter plates for screens with no VESA holes and checks that help you spot a loose mount early.
Our guide to computer monitor arms helps if you have not chosen an arm yet. Read the arm manual first, since clamp types and arm limits differ by model.
Compare HUANUO monitor arms if you are considering that brand.
What do you need before you mount a monitor on an arm?
You need a compatible arm, a matching VESA pattern, correct screws, and a desk that can hold the clamp. The screen size and weight must stay within the arm maker limit.
A second person helps with larger screens.
Check the back of your monitor for four threaded holes. The common patterns are 75 x 75 mm and 100 x 100 mm.
Measure the distance between hole centers if you are not sure.
Find the screws and spacers that came with the arm or plate. Short screws suit shallow holes, and spacers suit recessed holes.
Do not use screws that bottom out or feel loose.
Lay out a soft cloth on the desk. Set the screen face down on the cloth only if you can do so without twisting the panel.
Keep cables, tools, and the plate in reach before you lift the arm.
Make sure the desk edge is clean and dry. Dust under a clamp can let the arm creep over time.
Leave room behind the screen for cables and for the arm to swing.
How do you secure the arm to the desk?
Secure the arm to a solid desk edge and tighten the clamp until it does not shift. The arm must sit level before you attach any screen, since a crooked base will make the screen tilt no matter how you adjust the plate.
Open the clamp wide enough for your desk thickness. Check that the desk top is solid wood, metal, or a strong core, and use a different mount for thin panels, hollow cores, or glass.
A monitor wall mount can avoid putting clamp pressure on a weak desk.
Place the clamp on the edge and tighten it in small steps. Push the arm from side to side and pull it toward you to confirm it does not move and the desk does not flex or creak.
If your desk is thick, look for a best monitor arm with c clamp design that fits the full edge. If it is extra thick, a best monitor arm for thick desk option may suit better.
For a top mount monitor arm, follow the grommet or top mount steps in the manual. Lock the arm level once the base is firm.
How do you attach the VESA plate to the monitor?
Attach the plate to the back of the screen with all four screws, then clip or bolt the plate to the arm. The plate must sit flat with no gap.
A plate that rocks will loosen under vibration.
Remove any stand neck or bracket from the screen. Keep those parts in a bag in case you move the desk later.
Do not force a stand off if clips or screws are hidden.
Line up the plate holes with the screen holes. Start each screw by hand so you do not cross the threads.
Tighten in a cross pattern, such as top left, bottom right, top right, bottom left.
The VIVO Black Steel VESA Compatible Plate Mounting Kit, PT-SD-VA01A, uses a quick release removable plate for 75 x 75 mm and 100 x 100 mm patterns. It is made of alloy steel, comes in black, and lists a maximum screen size of 32 inches.

A steel quick release VESA plate for 75 x 75 mm and 100 x 100 mm screens up to 32 inches.
See it on AmazonUse spacers if the plate sits in a recessed area. The screws must pass through the plate and into the screen holes, but not so far that they press the panel.
If a screw spins, stop and try the correct length.
What if your monitor has no VESA holes?
Some screens need a model specific adapter plate before they can fit an arm. The adapter adds 75 x 75 mm or 100 x 100 mm holes to a screen that lacks them.
Check the exact model list before you order.
A standard plate will not fit every screen. Curved and thin models often hide the mounting points or use a different layout.
Measure the screen and read the model number on the rear label.
The VIVO Steel Quick Attach VESA Adapter Plate Bracket, MOUNT-HP02M, fits only HP M-Series models M22f, M24f, M27f, M27fd, M27fq, M27fwa, and M32f. VIVO says it adds 75 x 75 mm and 100 x 100 mm mounting for those screens.

A steel adapter that adds 75 x 75 mm and 100 x 100 mm mounting to listed HP M-Series screens.
See it on AmazonThe KTCEFE VESA Adapter Plate Bracket, model M01, fits only Sceptre C25 model C255B-FWT240, C30 models C305B-200UN, C305B-200UN1, C305B-200UNT, C305B-200UN1T, C305W-2560UN, and C305W-2560UN1, plus C34 model C345B-QUT168. It lists a 30 inch maximum screen size.

A metal adapter for listed Sceptre C25, C30, and C34 screens, with 75 x 75 mm and 100 x 100 mm fit.
See it on AmazonOur explainer on what is a vesa adapter plate covers when an adapter helps and when it does not. The best vesa monitor adapter plate page compares more options by model fit.
How do you lift and attach the screen to the arm?
Lift the screen with both hands, line up the plate, and secure it before you let go. Keep the screen close to your body and avoid twisting.
The arm should be level and locked at the height you want.
Slide the plate onto the arm head or fit the bolts through the plate holes. For a quick release plate, press until it clicks and tug it lightly to confirm the lock.
For bolted heads, start all bolts by hand first.
Tighten the arm head bolts evenly. The screen should not wobble or click when you tap a corner.
If it moves, the plate is not seated or the bolts are not through the arm head.
Connect power and video cables after the screen is secure. Leave a loose loop behind the screen so tilt and swivel do not pull the cable tight.
Route cables down the arm with the clips or ties supplied.
Power the screen on and check the image before you tidy the desk. Those signs can point to a loose cable or a plate that blocks a port.
How do you set screen height, tilt, and distance?
Set the top of the screen at or just below eye level, then move it back until text is clear. Sit in your normal posture first, since your chair height changes the right screen height.
Raise or lower the arm until the screen is level. Tilt the top back a little if overhead light hits the panel, and swivel it toward you if you sit off center.
Move the screen closer or farther until you can read without leaning. Many readers start about an arm length away, then adjust for screen size and text size.
If you use a best monitor mount for standing desk, set the height again after you raise the desk. People who use a best desk chair for multiple monitors should set each screen after the chair is in place.
Can you mount a monitor on an arm on glass or thin desks?
Glass, thin, and hollow desks need support before you add arm weight. The clamp spreads force over a small area, and a weak top can crack or sag.
A reinforcement plate or a different mount can spread that load.
For a monitor arm on glass desk, use a clamp made for glass or a stand base. A freestanding monitor stand is another option when you want to avoid clamping to the desk.
Do not tighten a standard clamp hard on glass.
Check the arm manual for glass limits and pad use.
A best monitor arm reinforcement plate can help under a thin desk top. It spreads the clamp force across a wider area.
Place it on the underside where the clamp foot sits.
Check the desk legs and floor too. A wobbly desk will move the screen even if the clamp is tight.
Tighten leg bolts and move the desk onto a firm floor before you adjust the arm.
If the desk is a standing desk with a thin top, keep heavy items centered over the legs. Test the full raise and lower range with the screen attached.
How do you check the mount is safe before daily use?
Check every screw, the clamp, and the full range of motion before you use the arm each day. A safe mount stays firm when you push, pull, tilt, and swivel it, and any slip is a sign to stop and fix it.
Run through this check list after you first mount the screen. Confirm all four plate screws are snug, the plate lock or arm head bolts are secure, and the desk clamp does not move.
Move the arm through its full range slowly. Watch the desk edge, the plate, and the screen corners as you move, and do not use the arm until the movement is smooth.
Re check the screws after the first day and after the first week, since steel plates and desk tops can settle as joints seat. Keep the manual and spare screws with your desk gear, and note the screen model, VESA pattern, and arm limit for future moves.
If you sit for long hours in the same seat, best office chair arm covers can add comfort, but they do not change the screen mount.
Frequently asked questions
How do I know if my monitor fits a monitor arm?
Check the back of the screen for four threaded holes in a 75 x 75 mm or 100 x 100 mm square. Then match the screen size and weight to the arm.
If your model has no VESA holes, a model specific adapter plate may add the pattern.
How tight should the desk clamp be on a monitor arm?
Tighten it until the arm does not shift when you push it, then stop. Over tightening can crack a desk top or damage a glass surface.
Use a reinforcement plate when the desk is thin or the arm will carry a heavy screen.
Can I mount a monitor on an arm by myself?
Many smaller screens can be fitted by one person with the arm locked level. For a large or heavy screen, ask a second person to hold the display while you fit the screws.
Never reach over the screen to force the plate into place.
What should I check after mounting a monitor on an arm?
Check that every screw is snug, the screen sits level, and the tilt and swivel move without slipping. Pull the arm through its full range and watch the clamp and plate.
Re check the screws after the first day of use.
About this guide: Our look at how to mount a monitor on an arm draws on maker specs, materials and what owners report. See how we research.



