Guide

How to Use a Monitor Arm

Updated on · By the 4Reviews team

To use a monitor arm, clamp or bolt it to the desk, attach the screens by their VESA holes, then set height, tilt and swivel so the top of the screen sits at or just below eye level and adjust tension so the arms stay put during everyday use.

On this page (11 sections)
  1. What is a monitor arm and what does it do?
  2. How to use a monitor arm for the first time?
  3. How do you mount a monitor arm safely to a desk?
  4. How do you set monitor height and distance correctly?
  5. How to use a monitor arm for two screens?
  6. How do you adjust arm position and tension for stable movement during everyday use?
  7. What should you check before buying a monitor arm?
  8. How do you organise cables on a monitor arm?
  9. What mistakes should you avoid when using a monitor arm?
  10. Do you need a VESA adapter plate for a monitor arm?
  11. Can a monitor arm replace a monitor riser or stand?

To use a monitor arm, clamp or bolt it to the desk, attach the screens by their VESA holes, then set height, tilt and swivel so the top of the screen sits at or just below eye level and adjust tension so the arms stay put during everyday use.

What is a monitor arm and what does it do?

A monitor arm is a desk mount that holds a screen above the desk on an adjustable arm or pole. It frees desk space and lets you change viewing angle without moving a heavy stand.

Most arms attach at the back edge with a clamp or through a grommet hole. The screen connects with VESA screws on its back.

If you are new to the idea, computer monitor arms explain the main types and what to check before you buy.

Tilt moves the top of the screen toward you or away. Swivel moves it left or right.

Rotation turns a screen from landscape to portrait. Height adjustment moves the whole screen up or down.

How to use a monitor arm for the first time?

Start with the arm unloaded and the screens off and disconnected. Read the instructions for your exact model first, because clamp position and screw lengths differ.

Place the clamp near the back centre of the desk, or on the side for an L-shaped layout. Tighten it by hand first, then check that the pole is vertical and does not wobble.

Attach one screen at a time. Fit the VESA plate to the back of the screen, then slide or lock it onto the arm.

Have a second person support a large screen if you cannot hold it safely alone.

How do you mount a monitor arm safely to a desk?

Mounting is safe when the clamp or bolt fits the desk thickness and the arm cannot slide. Measure desk thickness before you tighten the clamp fully.

Follow our monitor arm mounting guide for the installation steps.

A C-clamp grips the back edge and works on most desks up to the stated limit. A grommet mount passes a bolt through an existing desk hole and holds from below.

Check that the desk has no metal frame, drawer, or cable tray where the clamp will sit.

Keep the pole a few inches from the back edge so the arms can swing without hitting a wall. Plan the position before you attach screens.

How do you set monitor height and distance correctly?

Set height first, then distance, then angle. Sit in your chair in your normal posture before you move the screens.

Raise or lower the arm until the top of the screen is at or just below eye level. Your eyes should hit the screen a few inches down from the top edge.

If you prefer a fixed platform, compare monitor risers for desks.

Judge the angle from your normal seated position, not from standing.

Pull the screens toward you or push them back until text is sharp without leaning. A common starting point is arm's length, then adjust by a few inches.

Keep both screens at the same height for a dual setup.

How to use a monitor arm for two screens?

Dual arms use a centre pole with two arms, one for each screen. Mount the pole first, then add the arms at the same height.

Fit the left screen to the left arm and the right screen to the right arm. Centre both so their inner edges meet near the middle of the desk.

Then set tilt on both so they face you straight on.

Turn each screen with swivel to angle them slightly inward if you want a wrap-around feel. Keep the angle small for office work.

For portrait use, rotate one screen and set it beside a landscape screen.

How do you adjust arm position and tension for stable movement during everyday use?

Adjust position and tension with the screens attached, because weight changes how the arm moves. Hold each screen firmly while you make changes.

Move the arm to the position you want, then check whether it drifts when you let go. If the screen sinks, increase tension a little.

If it springs upward, reduce tension a little. Make small turns and test again.

Push the screen gently in each direction. It should move when you apply steady force and stop where you leave it.

Keep cables loose enough to allow movement.

What should you check before buying a monitor arm?

Check screen size, screen weight, VESA pattern, and desk thickness before you choose an arm. Those four numbers decide whether the arm will hold your setup.

Confirm each screen is within the minimum and maximum size range. Confirm each screen weight is below the per-screen limit, not just the total.

Confirm the back of the screen has VESA 75x75mm or 100x100mm holes. Measure the desk top at the mounting spot.

Think about how you will use the arm each day. Gaming setups often need quick tilt and swivel changes, so see best monitor arm for gaming for that use.

If budget matters more, best cheap monitor arm compares lower-cost options.

Who should choose the VIVO dual mount?

Choose the VIVO Dual Monitor Desk Mount if you have two screens from 13 to 30 inches and up to 22 lb each. It uses VESA 75x75mm or 100x100mm holes and a heavy-duty steel build.

It offers +90° to -90° tilt, 180° swivel, 360° rotation, and height adjustment along the centre pole. Cable clips run along the arms and pole to keep wires tidy.

Mounting uses a C-clamp for desks up to 3.25 inches thick or an optional grommet mount.

Who should choose the VIVO mechanical spring stand?

Choose the VIVO Dual Monitor Stand if you want mechanical spring counterbalance for screens from 17 to 32 inches. It supports screens from 4.4 lb to 19.8 lb each with the same two VESA patterns.

The spring design helps hold the screen in place in all directions with less manual tension setting. Read about gas versus spring monitor arms to compare how the counterbalance types work.

It also offers +90° to -90° tilt, 180° swivel, and 360° rotation.

It mounts with a heavy-duty C-clamp for tops up to 3.1 inches or a bolt-through grommet mount for tops up to 1.9 inches.

How do you organise cables on a monitor arm?

Good cable routing keeps the arm moving freely and stops wires from snagging. Plan the route before you connect power and video cables.

Run each cable from the screen down along the arm, then to the pole, then to the desk. Use the clips on the arm and pole to hold cables in place.

Leave slack at the elbow and swivel joints so the screen can turn.

Keep power cables away from touch controls and tension knobs. Label cables if you disconnect screens often, since dual setups can tangle quickly.

What mistakes should you avoid when using a monitor arm?

Most problems come from skipping checks on weight, VESA fit, and desk thickness. A screen that drifts or a clamp that slips usually traces back to one of those three.

Do not mount a screen that is heavier than the per-screen limit. Do not force VESA screws into holes with the wrong spacing.

Do not clamp over a desk drawer, metal support, or cable tray.

Avoid setting the arm too high, which can lead to a tilted head position during long work sessions. Avoid pushing screens too far back to gain desk space if you then lean forward to read.

Some users add Best Office Chair Arm Covers for comfort, and multi-screen users often compare Best Desk Chair for Multiple Monitors to match chair height to screen height.

Do you need a VESA adapter plate for a monitor arm?

You need an adapter only when your screen does not already have VESA holes in the arm's pattern. Most arm kits include plates for 75x75mm and 100x100mm patterns.

Check the back of the screen for four threaded holes in a square pattern. Measure or check the screen manual for the spacing.

If the holes match the plate, you can mount directly. If not, an adapter may help, but check the weight limit again after adding it.

Read what is a vesa adapter plate before you buy an extra plate. A gas spring arm is another option if you want lighter movement.

Read what is a gas spring monitor arm to see how it differs from a mechanical spring arm in daily use.

Can a monitor arm replace a monitor riser or stand?

A monitor arm can replace a riser for height, but it does not replace a riser for desk storage. Arms lift screens off the desk and free the surface below.

Risers lift screens and add shelves or drawers underneath.

Choose an arm if you need tilt, swivel, rotation, and easy height changes. Choose a riser if you want storage for a keyboard, books, or files under the screen.

If you prefer wood and storage, see best wood monitor riser. Start with safe mounting, correct height, and tension that holds during everyday use.

That order gives you a stable setup you can adjust in seconds.

Frequently asked questions

How do I adjust tension on a monitor arm?

Hold the screen while you turn the tension control, then let go and see if it drifts. Tighten it a little at a time until the arm holds position but still moves smoothly when you push it.

The screen should not sag or spring back up on its own.

What height should a monitor arm be set to?

Set the screen so the top edge is at or just below your eye level when you sit upright. Your eyes should meet the screen a few inches down from the top.

Move the chair first, then raise or lower the arm to match.

Do I need a VESA plate for a monitor arm?

Most monitor arms use VESA 75x75mm or 100x100mm holes on the back of the screen. Check that your screens have one of those patterns and remove any stand before mounting.

Use the screws that fit your screen depth.

Can one arm hold two monitors?

Yes, many dual arms hold two screens on a centre pole. Check the size and weight limits for each screen, since limits are per arm and per screen.

Two smaller screens are easier to balance than two large or heavy ones.